Data Recovery over Network

Generally, data restoring over network is very much the same as that on a local computer.

R-Studio Agent should be running on the network computer where data are to be recovered.

To connect to a remote computer

Click the Connect to Remote button or select Connect To Remote on the Drive menu

A list of nearby computers will appear in the Computer List on the Connect to Remote Computer dialog box.

Connect to Remote Computer dialog box

‚	Select a computer from the list on the Connect to Remote Computer dialog box and enter the password

Otherwise, you need to specify in the Computer: field the name or IP address of the remote computer where data are to be recovered. The Port should coincide with the port specified for the R-Studio Agent.

The Password: field is for the password of R-Studio Agent running on the remote computer.

Note: If the remote computer is started with R-Studio Agent Emergency, leave this field blank.

Ü	R-Studio will connect to the remote computer and show its hard drive and logical disk structure of the remote computer below the device/disk structure of your local computer

It can be processed the same way as that on a local computer.

When R-Studio connects to the remote computer, it check if R-Studio Agent is present and its password. If there is no R-Studio Agent installed, R-Studio may try to remotely install it. See the R-Studio Agent topic for details.

You may return to the disks/drives on your local computer by clicking the Open Local Drives button or selecting Open Local Drives on the Drive menu.